A Four-Timescale Continuous-Time Model with Sliding-Window Calibration for State-of-Charge Prediction on Battery-Powered Devices

Authors

  • Haiyang Yu Nanjing University of Science and Technology, Nanjing, China

DOI:

https://doi.org/10.54097/dwfm4n93

Keywords:

State of Charge, Multi-Timescale Continuous-Time Model, Sliding-Window Calibration

Abstract

Predicting how long a battery-powered device will run before its state of charge (SOC) reaches a usable limit is a forward problem in continuous time: the quantity of interest is a first-passage time of a state driven by inputs whose timescales differ by about seven orders of magnitude, from processor load within seconds to capacity loss over the service life. A model resolved on one timescale misplaces the others. This paper develops a continuous-time model in which one state equation is closed by four terms, each owning a band: a discharge-power decomposition into baseline, user and environmental parts, an hourly integration whose power coefficients are recalibrated on a sliding window, an aging coefficient on the day-to-month band, and an Arrhenius–solid-electrolyte-interphase capacity trajectory beyond a month. Sixteen public datasets supply the coefficients and the usage statistics, and nine of them carry the parameters the model needs and serve as validation runs. Across the nine runs the mean absolute error is 6.0786 and the root mean square error is 7.0300 in SOC percentage points. The predicted mean falls below the observed mean in every run, and across the five tabulated runs the gap is 4.20 to 5.68 points, with that offset accounting for 97% to 99% of the mean absolute error in four of them, which places the dominant error in the calibration rather than in the structure. At full charge the predicted endurance runs from 3.0 h under extreme usage to 11.9 h in low-power mode, a factor of 4.0 that a user can move within by changing settings alone.

Downloads

Download data is not yet available.

References

[1] Albakri, M., & Darwish, A. (2026). A review of modelling, state of charge estimation and management methods of EV lithium-ion batteries. Batteries, 12(3), 92. https://doi.org/10.3390/batteries12030092 DOI: https://doi.org/10.3390/batteries12030092

[2] Peng, J., Qian, X., Xu, X., et al. (2025). State of charge estimation techniques for lithium-ion batteries: A review. Energy Technology, 13(12), 2500542. https://doi.org/10.1002/ente.202500542 DOI: https://doi.org/10.1002/ente.202500542

[3] Wang, K., Jia, T., Wang, M., et al. (2026). An adaptive timescale decoupled parameter identification equivalent circuit model for lithium-ion battery capacity estimation. Journal of Energy Storage, 161, 122024. https://doi.org/10.1016/j.est.2026.122024 DOI: https://doi.org/10.1016/j.est.2026.122024

[4] Zhu, W., Zhou, P., Ren, D., et al. (2022). A mechanistic calendar aging model of lithium-ion battery considering solid electrolyte interface growth. International Journal of Energy Research, 46(11), 15521–15534. https://doi.org/10.1002/er.8249 DOI: https://doi.org/10.1002/er.8249

[5] Karger, A., Schmitt, J., Kirst, C., et al. (2023). Mechanistic calendar aging model for lithium-ion batteries. Journal of Power Sources, 578, 233208. https://doi.org/10.1016/j.jpowsour.2023.233208 DOI: https://doi.org/10.1016/j.jpowsour.2023.233208

[6] Samanta, A., & Williamson, S. (2023). Machine learning-based remaining useful life prediction techniques for lithium-ion battery management systems: A comprehensive review. IEEJ Journal of Industry Applications, 12(4), 563–574. https://doi.org/10.1541/ieejjia.22004793 DOI: https://doi.org/10.1541/ieejjia.22004793

[7] Ding, M., Wang, T., & Wang, X. (2021). Establishing smartphone user behavior model based on energy consumption data. ACM Transactions on Knowledge Discovery from Data, 16(2), 1–40. https://doi.org/10.1145/3461459 DOI: https://doi.org/10.1145/3461459

[8] Choi, Y., Ha, R., & Cha, H. (2018). Fully automated OLED display power modeling for mobile devices. Pervasive and Mobile Computing, 50, 41–55. https://doi.org/10.1016/j.pmcj.2018.07.006 DOI: https://doi.org/10.1016/j.pmcj.2018.07.006

[9] Ali, J., & Altamimi, M. (2022). Energy consumption model for data transfer in smartphone. Computer Communications, 182, 13–21. https://doi.org/10.1016/j.comcom.2021.10.014 DOI: https://doi.org/10.1016/j.comcom.2021.10.014

[10] Ma, S., Jiang, M., Tao, P., et al. (2018). Temperature effect and thermal impact in lithium-ion batteries: A review. Progress in Natural Science: Materials International, 28(6), 653–666. https://doi.org/10.1016/j.pnsc.2018.11.002 DOI: https://doi.org/10.1016/j.pnsc.2018.11.002

[11] Alqahtani, A. H., Fahmy, H. M., Hasanien, H. M., et al. (2024). Parameters estimation and sensitivity analysis of lithium-ion battery model uncertainty based on osprey optimization algorithm. Energy, 304, 132204. https://doi.org/10.1016/j.energy.2024.132204 DOI: https://doi.org/10.1016/j.energy.2024.132204

Downloads

Published

20-11-2026

Issue

Section

Articles

How to Cite

Yu, H. (2026). A Four-Timescale Continuous-Time Model with Sliding-Window Calibration for State-of-Charge Prediction on Battery-Powered Devices. Academic Journal of Applied Sciences, 4(1), 1-5. https://doi.org/10.54097/dwfm4n93